Sn63PbA Solder Paste
Catalogue：Solder Paste
Product features:
The paste is uniform, odorless, and not layered;
Good printing performance, strong adhesion, and minimal collapse;
Good wettability, minimal splashing, fewer tin beads, and excellent welding performance;
Full solder joints, few voids, and high insulation resistance between solder joints;
This product is suitable for SMT surface mount and reflow soldering processes.
Information
This product uses high-quality tin powder as the main raw material, and adopts formulas such as composite multi active agents and thixotropes. It is produced with advanced production technology, strict quality control processes, and a complete testing system.
Product features:
The paste is uniform, odorless, and not layered;
Good printing performance, strong adhesion, and minimal collapse;
Good wettability, minimal splashing, fewer tin beads, and excellent welding performance;
Full solder joints, few voids, and high insulation resistance between solder joints;
This product is suitable for SMT surface mount and reflow soldering processes.
Model: Sn63PbA solder paste
Sn63 Composition of solder paste alloy
| CHEMICAL ELEMENT | CHEMICAL COMPOSITION(wt.%) |
| Sn | 63±1 |
| Pb | margin |
| Sb | <0.10 |
| Cu | <0.030 |
| Bi | <0.030 |
| As | <0.020 |
| Fe | <0.020 |
| Zn | <0.0020 |
| Al | <0.0020 |
| Cd | <0.0020 |
| S | <0.012 |
Sn63 Physical properties of solder paste
| melting point | 183℃ |
| flux content % | 12.2±0.2 |
| viscosity Pa.s | 170±30Pa.S |
| powder particle size μm | 25~45/20~38μm |
| expansion rate % | >75% |
Packaging specification: 500g/can
Instructions:
Refrigerate to ensure stability, with a shelf life of six months under 0-10 ℃ refrigeration conditions.
Before use, the solder paste must be allowed to return to room temperature, usually for at least 4 hours before printing.
To prevent any impact on quality, do not mix the solder paste used on the wire mesh with the solder paste in the can.
Avoid direct contact with skin and eyes, wash hands after use.
- Related products
SnAg0.3Cu0.7 Solder Paste
Product features:
The paste is uniform, odorless, and not layered;
Good printing performance, strong adhesion, and minimal collapse;
Good wettability, minimal splashing, fewer tin beads, and excellent welding performance;
Full solder joints, few voids, and high insulation resistance between solder joints;
Good conductivity and thermal conductivity.
This product is suitable for SMT surface mount and reflow soldering processes. Specially suitable for special applications with high requirements for conductivity, thermal conductivity, and mechanical properties.
